HC10 Hose Retrieval Video

 

Here we have a Cadman Hydraulic Power Unit mounted to a truck – which houses a 82 HP diesel engine with Rexroth AV10VO – powering  the retrieval of 10″ Superman HVT thermoplastic polyurethane (TPU) hose onto a Cadman HC10 Hose Caddy.

More About the Cadman HC10 Hose Caddy

Meet the crème de la crème of hose reels. Engineered for endless miles of highway travel, the HC10 Hose Caddy conveniently enables the operator to pull multiple reels behind truck, a flatbed tractor trailer, or can be mounted to the HC10T trailer. Read more

Cadman Superman HVT Polyurethane Lay Flat Hose Sale

HOSE SALE - INQUIRE TODAY!

Cadman Superman HVT is made from thermoplastic polyether based polyurethane (TPU) extruded through a circular woven jacket made from high tenacity filament polyester yarn. The hose is intended for transfer of large volumes of liquid at higher than normal working pressures while at the same time being lightweight and easy to deploy.

Lay Flat Hose for Fracking

The excellent abrasion resistance prevents the hose from being damaged when deployed in rugged terrain where other types of outer cover would be worn off quickly due to the pulsations of the flow combined with the weight of the filled hose.

The heavily reinforced weave ensures minimum extension in length and minimum “snaking” of deployed hose.

Cadman Superman HVT can operate in an ambient temperature range from -50°C (-58 f) to +75°C (167 f), and can withstand intermittent use up to +80°C (176 f).

Standard lengths up to 660’ (200m).

10” Hose allows for higher volumes of water transfer with less friction loss, saving fuel, and saving time

Invest Now for Long-Term Savings

Inquire today

Test Run: Cadman 600 HP 6822 MX Pumping Station

August 22, 2014 - We tested a new Cadman Pumping Station which houses a 600 HP John Deere engine and a Cornell Cornell Redi-Prime® 6822 MX pump at a nearby lagoon.

The setup consisted of four 8” suction hoses and two discharge hoses. The discharge hoses supplied water to four Nelson 200 Series Big Gun® end guns connected to capped hoses which blasted water back into the pond.

We ran the unwearied machine for over sixty minutes ramping up pressure to 275 psi. At approximately 120 psi the Nelson guns maxed out at 1000 gpm (29 bbl/min).

The trial run went exceptionally well with the John Deere engine running flawlessly alongside the Cornell Redi-Prime® pump - churning out as much water as the four irrigation guns could handle.

The John Deere 600 HP engine consists of a heavy-duty air cleaner, cooling system with suction fan, exhaust system with an industrial muffler, belt guard assembly, and control panel with safety shutdowns. It is a dependable resource for high performance power and includes an ultra-efficient fuel injection system.

Cornell Redi-Prime® pumps are designed to withstand the most rugged and demanding industries; construction, industrial, rental, municipal, oil, and gas. These energy efficient pumps are engineered to handle high operating pressures with high flow requirements. The MX series pumps have multi-vane, enclosed impellers are ahead of the pack when it comes to efficiency. They are all iron constructed with an extra heavy wall thickness raising the bar on high volume water pumps.

The Cadman Pumping Station coasted along with all four irrigation guns firing simultaneously creating a mesmerizing water curtain as a backdrop to the scene. At one point during the demonstration the wind picked up and diverted the stream out of the pond causing the water level along the shoreline to instantly descend down the bank. This is one powerful machine.

After a successful morning, the impressively robust Cadman 600 HP 6822 MX Pumping Station will be cleaned up and shipped to a client in the oil and gas industry down in Texas next week.

Mandals Superior Quality Hose is Key in Cadman Fluid Transfer Products

Cadman has partnered with the premiere manufacturer of TPU and Nitrile rubber lay flat hoses to provide an outstanding product for the transfer of high volume water transfer efficiently, safely, and cost-effectively. Hose is the key component of any water transfer operation and as such it needs to be durable and resilient in conditions as different as the raging heat and blazing sun of the desert, to sub-zero temperatures of the depths of winter.

Mandal’s vulcanizes each of their hoses to increase durability and to give it superior mechanical properties and durability, leading to a much longer lasting hose than competitors’ brands who do not vulcanize. Hoses are ‘benched’ to provide a consistent diameter across the entire length of hose so that hose fittings will fit properly into hose ends, reducing the danger of leaks. This also makes fittings easier to install, repair and handle, saving you valuable time before and during a job.

The superior weave of Mandals’ hose prevents elongation and snaking of hose, meaning that hose stays where you put it, and is easier to retrieve after the job is done. Superior coverage of the weave during the extrusion process ensures the rubber or TPU hose won’t separate from the weave as it can in some cheaper brands and superior abrasion resistance means that the weave won’t be exposed leading to costly downtime.

Finally, UV inhibitors in the rubber mean that even under the most extreme UV environments won’t cause the hose to break down like it will in brands that don’t use inhibitors in their manufacturing - meaning you can get years of trouble - free use out of your hose.

Benefits & Features